How to Service a Rotary Screw Air Compressor

 

ROTARY SCREW AIR COMPRESSOR

WWW.HKAIRCOMPRESSORS.COM

214-428-2868

Rotary screw air compressors are essential machines in industrial applications where a continuous supply of compressed air is required. These compressors are highly efficient, durable, and can run for long periods with minimal maintenance. However, like any mechanical equipment, they require regular servicing to ensure optimal performance, prevent downtime, and prolong their lifespan. This essay will discuss the key steps and procedures involved in servicing a rotary screw air compressor, emphasizing the importance of regular maintenance, detailed instructions for various components, and best practices for long-term upkeep.

1. Understanding the Importance of Servicing a Rotary Screw Air Compressor

Before diving into the specifics of servicing a rotary screw air compressor, it is crucial to understand why regular maintenance is vital. Rotary screw compressors are complex machines that operate under high pressure, extreme heat, and continuous duty cycles. Without proper maintenance, they are prone to breakdowns, inefficiency, and, in some cases, catastrophic failure.

Benefits of Regular Maintenance:

• Increased Efficiency: A well-maintained compressor will use less energy to produce the same volume of air, reducing operating costs.
• Extended Equipment Life: Regular servicing ensures that the internal components such as screws, bearings, and seals remain in good condition, preventing premature wear.
• Reduced Downtime: Preventative maintenance reduces the likelihood of unexpected breakdowns, ensuring that operations run smoothly.
• Optimal Air Quality: Regular filter changes and system checks help maintain the quality of the compressed air, which is critical for applications requiring clean, dry air.

2. Safety Precautions Before Servicing

Servicing a rotary screw air compressor involves working with electrical components, high-pressure systems, and sometimes hazardous chemicals. Therefore, safety is the top priority before beginning any maintenance procedures. Here are some essential safety precautions:

• Turn Off and Disconnect Power: Before performing any maintenance, ensure the compressor is completely turned off and disconnected from the power supply. Lockout and tagout procedures should be followed to prevent accidental start-up.
• Depressurize the System: The compressor should be fully depressurized to avoid any unexpected release of compressed air, which could cause serious injury. Open the drain valves and release the pressure in the system.
• Allow Cooling: Rotary screw compressors operate at high temperatures. Ensure the compressor has cooled down before starting any work to avoid burns or other injuries.
• Use Proper Personal Protective Equipment (PPE): Wear gloves, safety goggles, and protective clothing when handling oils, chemicals, or any part of the compressor.

3. Components of a Rotary Screw Air Compressor That Require Servicing

To properly service a rotary screw air compressor, it’s essential to understand the key components that need attention:

• Air Filters
• Oil and Oil Filters
• Separator Filter
• Coolers
• Belts and Pulleys
• Drive Coupling
• Motor Bearings
• Screw Elements
• Control Systems
• Condensate Drains

Each of these components plays a vital role in the overall performance of the compressor, and their maintenance intervals vary depending on the operating conditions and the manufacturer’s recommendations.

WWW.HKAIRCOMPRESSORS.COM

4. Step-by-Step Servicing of a Rotary Screw Air Compressor

4.1. Air Filter Maintenance

The air filter is responsible for keeping dust, debris, and other contaminants out of the compressor. A clogged or dirty air filter reduces efficiency, increases wear on internal components, and can cause overheating.

Steps to service the air filter:

• Inspection: Check the air filter regularly for dust buildup and physical damage. Most manufacturers recommend inspecting it at least once a month.
• Cleaning or Replacing: If the air filter is reusable, clean it using compressed air or a vacuum. If it's damaged or too dirty, replace it with a new one. Typically, filters should be replaced every 2,000 to 4,000 operating hours, but this depends on the environment in which the compressor operates.
• Reinstallation: After cleaning or replacing the air filter, ensure it is securely fitted to prevent any leaks.

4.2. Oil and Oil Filter Maintenance

Rotary screw compressors rely heavily on oil for lubrication, cooling, and sealing between the screw elements. The oil in the system should be kept clean and at the proper level to ensure smooth operation. Over time, oil degrades and becomes contaminated, reducing its effectiveness.

Steps to service the oil and oil filter:

• Check Oil Levels: Regularly check the oil levels through the sight glass or dipstick provided. Low oil levels can cause excessive wear and overheating.
• Drain Old Oil: Before changing the oil, run the compressor for a few minutes to warm it up. This makes the oil easier to drain. Then, turn off the machine and open the drain valve to let the old oil flow out into a container. Be sure to dispose of used oil according to local environmental regulations.
• Replace the Oil Filter: Unscrew the old oil filter and replace it with a new one. Lubricate the seal of the new filter with fresh oil before installation to ensure a tight fit.
• Refill with Fresh Oil: Refill the system with the recommended oil for your compressor model. Always use high-quality synthetic oils or manufacturer-approved lubricants. Overfilling can cause excessive pressure and leaks, so ensure the oil level is correct.
• Check for Leaks: After refilling, run the compressor and check for any oil leaks at the filter or drain points.

4.3. Separator Filter Maintenance

AIR COMPRESSOR SERVICE


WWW.HKAIRCOMPRESSORS.COM

214-428-2868

The separator filter is designed to separate oil from the compressed air. Over time, the separator filter can become clogged with oil residue, which reduces the compressor's efficiency and allows oil to enter the air stream.

Steps to service the separator filter:

• Inspection: Check the differential pressure across the separator. If the pressure drop exceeds the manufacturer’s specifications, it is time to replace the separator.
• Replacement: To replace the separator filter, depressurize the system and remove the old filter from the separator tank. Install the new filter and ensure all seals are intact to prevent oil leakage.
• Monitor for Oil Carryover: After replacing the separator, keep an eye on the air system for any signs of oil carryover, which could indicate an issue with the new filter.

4.4. Cooler Maintenance

The cooler in a rotary screw compressor helps dissipate the heat generated during compression. Over time, the cooler can become clogged with dust and dirt, reducing its effectiveness and causing the compressor to overheat.

Steps to service the cooler:

• Cleaning: Use compressed air or a soft brush to clean the cooler fins. Be careful not to damage the fins during cleaning.
• Check for Leaks: Inspect the cooler for any signs of oil or water leaks, especially at the connection points. If leaks are detected, they must be repaired immediately to avoid performance issues.
• Fan Inspection: Ensure the cooling fan is operating correctly. If it is not running at the proper speed or is damaged, replace or repair the fan.

4.5. Drive Belt and Pulley Maintenance

If your rotary screw compressor uses a belt-driven system, the belts and pulleys require regular maintenance. A loose or worn belt can cause slippage, reduced efficiency, and increased wear on the motor.

Steps to service the drive belt and pulleys:

• Belt Tension: Check the tension of the belt regularly. If the belt is too loose, tighten it according to the manufacturer’s specifications. Most compressors have an adjustable tensioning system.
• Inspect for Wear: Over time, belts can develop cracks, fraying, or glazing. If the belt shows signs of wear, replace it immediately.
• Pulley Alignment: Ensure that the motor and compressor pulleys are properly aligned. Misalignment can cause premature belt wear and reduce the overall efficiency of the compressor.

4.6. Motor Bearing Maintenance

The bearings in the compressor motor play a vital role in ensuring smooth operation. If the bearings fail, the motor can seize or overheat, causing serious damage to the compressor.

Steps to service the motor bearings:

• Lubrication: Depending on the type of bearings, they may need to be lubricated periodically. Use the manufacturer-recommended grease and follow the specified intervals.
• Check for Noise: Listen for any unusual noises from the motor, such as grinding or squealing, which may indicate bearing wear. If detected, replace the bearings immediately to prevent motor damage.

4.7. Screw Element Maintenance

The screw elements (rotors) are the heart of the rotary screw air compressor. While they are designed to last for many years, they do require some maintenance.

Steps to service the screw elements:

• Lubrication: Ensure the oil levels are maintained, as the screw elements rely on lubrication to prevent wear and ensure efficient compression.
• Check for Wear: Over time, the rotors can develop wear or damage. If the compressor is producing less air or if the rotors show visible signs of wear, they may need to be replaced or re-machined.
• Temperature Monitoring: Keep an eye on the compressor's operating temperature. Higher-than-normal temperatures could indicate issues with the screw elements or other components.

4.8. Condensate Drain Maintenance

Condensate drains remove water and oil that collect in the air system. These drains can become clogged or malfunction, leading to moisture buildup in the air lines.

Steps to service the condensate drain:

• Inspection: Check the operation of the automatic drain system. If the drain is not functioning correctly, it can cause water to accumulate in the air tank or lines.
• Manual Draining